Yilun is a manufacturer that produces Shandong mine conveyors. In fact, many people are more concerned about follow-up maintenance after purchasing Shandong Yilun conveyors. Reasonable maintenance is also more important.

      The inspection results of the mine conveyor shall be recorded in detail. In addition to the daily inspection items, check the oil level of the reducer, if necessary, add the same grade of oil; check whether the tensioning winch is flexible, whether the wire rope is worn, whether all of the pulley grooves, whether the pulley transmission is flexible, Otherwise, the stolen goods should be removed, the tension of the conveyor belt idling should be readjusted; the track of the storage belt device should be checked and cleaned. Monthly inspection: In addition to daily inspection and weekly inspection items, additional inspection of the pulley lubrication of the tensioning winch wire rope, inspection of the wear and damage of the wire rope.

      Semi-annual inspection: In addition to the daily, weekly, and monthly inspections, additional inspections will be added. Add oil to all roller bearings and clean up the dirty oil on the roller; all the mine conveyor cleaner blades and the scraper of the cleaning roller that need to be replaced or exchanged must be replaced or exchanged in time; clean the reducer, change the oil, and analyze the next time Oil change cycle; check whether the medium of the fluid coupling needs to be supplemented with flame-retardant fluid (water), and all seals and bearings are worn.

      The dust collection device of the mine crusher hits the mountain and transports stones or dust, which will inevitably produce pollution. Dust cleaner is a device used to separate dust from the flue gas. According to requirements such as dispersion degree. Because the dust has the same charge and repels each other, it spreads rapidly in the space of the subsequent stage to form a uniformly distributed aerosol suspension state, so that the concentration and flow rate of the subsequent bag filter are uniform. The resistance of the filter bag is significantly reduced. The former consumes more gas energy, while the latter consumes less. Check whether the resistance of the ash removal mechanism increases abnormally. Install the sleeve in the hole of the faceplate. In severe cases, it will affect the normal operation of the dust collector.